China 5 Axis CNC Router with Z Axis 1000mm for Wood Aluminum Mold Making
This is wood aluminum mold making 5 axis cnc router machine RSKM25-HB with z axis 1000mm and automatic tool changer linear type.
Syntec 5 axis control system and give fast milling speed and higher accurate for wood and aluminum molds.
Main components of 5 axis CNC Router:
1. System:Adopting Taiwan Syntec 8 axis new generation control system
It can be connected with many software, which has the characteristics of simple operation, fast processing speed and stable operation
2.Transmission: All axis adopt HIWIN30 square rail and helical rack pinion also from Taiwan, the rail way we use whole one piece no broken to make sure working more smooth
3.Spindle motor: We use high accurate wood mould 5 axis ATC cnc router with BT40 or ISO40 and this spindle can rotate 360 degree with low noise and fast speed
4.Software and program:Breakpoint memory function can automatically memorize breakpoints in case of unexpected cutter breakage and power failure, and realize the function of continuous processing at breakpoints
Intelligent cross-border protection function can prevent excessive processing caused by machine collision
5.Handle wheel: it is with wireless handle that operation is more convenient. It can realize virtual processing, actual processing, locating the origin, suspending and other operations
6.USB surface:The USB interface and the processing program can be directly processed from the U disk.
7.Cables:Syntec brand servo motor drivers with connection directly from control panel avoid all problems in signal transmission
8.Automatic tool changer:Linear tool changer 12 pcs with BT40/ISO40 tool holder and max support 20 pcs automatic tool changer
9.Motor and drivers:we use the same brand motor and drivers from Syntec that can work more better with system 1.1kw motor is strong enough and enclosed loop working way to make sure mold products surface perfectly more smooth
Advantages of 5 axis cnc router RSKM-HB:
1. Totally machine is with X/Y/Z/A/B five aixs fast working efficiency
2. Diversified control processing speed can control the working speed, traveling speed, dropping tool speed, lowering tool speed, greatly improve the quality and efficiency.
3.Intelligent processing cross-border protection function can prevent mechanical collision due to excessive processing of design file.
4. Z-axis travel can be heightened to 2.1 meters, so that very suitable for processing large-scale three-dimensional surface..
5. Adopt TAIWAN Syntec 8axis numerical control system, high machining accuracy and high speed.
6. The Japan THK rails.and the Germany original rotating arm ensure the accuracy and strength of the mechanical
7. Advanced Syntec system with intelligent program
8. You no need prepare separate post processor just make a suitable 5 axis design in softare then input Syntec system then will be ok.
Main technical parameters of Rhino 5 Axis CNC Router RSKM25-HB:
| Machine Features |
|
| X,Y,Z working area |
1500*3000*1000mm |
| Table size |
2050*3040mm |
| Spindle |
10kw HSD spindle, 1000-24000rpm |
| Motor |
Syntec Servo motor and driver |
| Moving mode |
Gantry moving |
| C travelling |
±180° |
| A travelling |
±360° |
| Beam spacing(MM) |
4260 |
| Beam Height(MM) |
2150 |
| Vacuum pump |
Dry Vacuum pump 5.5kw |
| product fixed form |
vacuum table |
| Tool magazine |
Linear tool tool magazine (6 positions) |
| X, Y, Z Travelling Potioning Accuracy |
±0.03/300mm |
| X, Y, Z Travelling Repositioning Accuracy |
±0.05mm |
| Frame |
Cast steel |
| X, Y structure |
rack and pinion drive, THK rail linear bearing from Japan |
| Max Rapid Travel Rate |
45,000mm/min |
| Max working speed |
30,000mm/min |
| Z Axis |
20m/min |
| c Axis |
20m/min |
| A Axis |
20m/min |
| Machine size |
4260*2150*3300 |
| Total Power(kw) |
24KW |
| Maximum lifting weights |
20T |
| Working voltage |
AC380V/50Hz |
| Command languages |
G code,F/S |
| Control system |
Syntec from taiwan |
| Collet |
BT40/ISO40 |
| Limit switch |
Omron |
Optional accessories of 5 axis CNC Router machine:
A). We have Germany/Italy 5 axis spindle motor just price a little higher than China made one
B). We have Japan/Germany/American 5 axis system are available at our factory like OSAI etc
C). .X/Y/Z-axis guide rails PMI from taiwan also no problem with different size 25/30/35/ etc
D). .ATC working method:Linear tool changer and disc tool changer for your option
Machine detail photos at our factory:
Samples made by Rhino 5 axis cnc router machine:
FAQ:
Now it is time to answer your questions:
Q1,What is warranty and service you have?
A:Machine warranty 2 years for free and long life time serice and we have professional engineers who are responsible for service. We offer online/telephone/email service 7x24 hours.
We have online talking group in WhatsApp and Wechat with engineers and customers
Q2,How can I confirm machine specifications?
A:Firstly we need to know the working size you need and what is materials you want to mill and process so that we will offer you the best solution for this 5 axis cnc router machine
Q3,What is software and post processor you use to make design and g-code?
A:We have powermill and alphcam software with post processor supply to customers
Q4,Do you offer training for the softwares?
A:Yes, we have engineer who work this two softwares so you can come our factory or we send them to your company to give you training
Q5,Could you customized this 5 axis cnc router machine as per our detail requirement?
A:Yes, you give us all your detail requests and we make agreement then start machine productime
Customers from all over the world visited our factory:
Welcome to let us know your more detail requirements for this 5 axis cnc router machine for wood aluminum mold making!
We are ready to offer you the best solution ~~
The end....
