Over 15 years Professional Cnc&laser machine production Manufacturer
Company News

10mm Arcylic Cutting by Co2 Laser Cutting Machine 100w--Rhino Laser

Views : 514
Update time : 2023-11-15 17:06:00

10mm Arcylic Cutting by Co2 Laser Cutting Machine 100w--Rhino Laser

Rhino co2 laser cutting machine is professional for 10mm arcylic cutting with fast speed and high precision.Machine is equipped with D6445 program easy to learn and operate. Honeycomb working table that can cut any small size pieces no problem. Ball screw transmission TBI brand make sure cutting accurate more higher and edge smooth. We have Japan servo motor drivers for your option. The popular model for 10mm acrylic cutting is R-6090/R-1290/R-1390/R-1610 for your option.
 


What advantages of Rhino co2 laser cutting machine for 10mm acrylic cutting:
① Good cutting effect: finished product no need require fire polishing, it is very smooth and bright, without jagged marks, and the acrylic thickness can be cut up to 20 mm at a time;

②The laser tube is high quality and has a long life: The best laser tube in China not only has stable performance, but also has a long life (about 8~14 months), with a power of 100W and can be used for half a year;

③The whole machine has excellent performance: it can work continuously for 24 hours, and the original laser guide rail is accurate and durable;

④ Fast cutting speed: For example, it is used to cut a arcylic with a thickness of 10 mm.

Above is Rhino cnc co2 laser cutting machine advantages than others, also the co2 laser cutting machine have many feathers in arcylic 10mm cutting:
1. Wide range: Carbon dioxide laser can engrave and cut almost any non-metallic material. And the price is cheap!

2. Safe and reliable: using non-contact processing, no mechanical extrusion or mechanical stress is produced. There are no "knife marks" and no damage to the surface of the processed parts; the material will not deform;

3. Precise and meticulous: processing accuracy can reach 0.02 mm;

4. Saving and environmental protection: The beam and spot diameter are small, generally less than 0.5mm, which saves materials and is safe and hygienic for cutting processing.

5. Consistent effect: ensure that the processing effect of the same batch is completely consistent;

6. High speed: high-speed engraving and cutting can be performed immediately according to the pattern output by the computer;

7. Low cost: Laser processing is not limited by the processing quantity and is cheaper in small batch processing services.

Cutting speed set as per different cutting thickness:
There have Three factors: arcylic thickness, material thermal expansion coefficient and laser output power.
In this test, we use a CO2 laser with 100W output power to cut line-cut glass with a thickness of 10mm at a speed of 500mm/second.
In contrast, a hard metal wheel of the same thickness can cut glass at a speed of up to 1500 mm/s. But even in speed-focused applications, the economic and quality advantages of laser cutting make up for the difference.
At the same time, I believe that by further optimizing the processing technology and using laser cutting with high output power, the processing speed will simply increase by 2 to 3 times.

Also the laser-induced separation can cut very precise curved patterns because the crack marks are traced precisely in the laser beam.
Experimental results show that the Rhino laser cutting device can complete the set pattern continuously and accurately, with a repeatability of up to +50μm. Therefore, the laser can accurately cut curves and three-dimensional graphics.

Recommended 10mm arcylic co2 laser cutting machine details R-1390:

▶ Model

R-1390 laser cutting and engraving machine

▶ Laser type

CO2 laser tube, water-cooled

▶ Laser power

100W laser tube RECI brand

▶ Working area

1300mm x 900mm (width x length)

▶ Engraving speed

0-6000cm/min

▶ Cutting speed

0-5000cm/min

▶ Repeating location

≤±0.01

▶ Transmission type

Belt transmission ONK from Japan

▶ Driving system

stepper motor YAKO 

▶ Machine table                     

 Open table

▶ Work tabke

Aluminium blade table with up and down table together

▶ Graphic format supported

BMP, HPGL(PLT), JPEG, DXF,AI, DST

▶ Software supported

CorelDraw, AutoCAD, Photoshop, Tajima

▶ Control system

RDCAM software

▶ Working voltage

220V or 110V, 50Hz-60Hz

▶ Applicable Industries:

Kitchen,furniture,electronic components, glass,plexglass, MDF, hardware, acrylic, non metal materials industry,Sign industry etc

▶ Applicable Materials:

Non-metal materials like acrylic,plastic,pvc,wood,colored boards,paper,leather,shells,ABS boards,stone,glass etc


END.
Let Us Bounce Into Your Inbox
Enter your email to hear from us about Product list, Latest Products and Customer application examples!