What Difference of ATC CNC Router Than Ordinary 3 Axis CNC Router
ATC CNC Router is cnc router with Automatic Tool Changer function but it not only because of ATC function, there have more advantages and difference than common 3 axis and 4 axis cnc router.
Below we will explain to you the difference between of them :
Machine Configuration difference:
1. Spindle：
ATC CNC Machine spindle is 9.0kw HQD or HSD air cooling spindle with ATC function (also have some use water cooling spindle power 5.5kw)
Ordinary cnc router spindle power have 2.2kw/3.5kw/4.5kw/5.5kw/6kw etc and now mostly use air cooling and water cooling both in market.
Automatic tool change (linear type tool changer and disc type tool changer)
ATC spindle has an independent tool magazine that can automatically replace the required tools during processing of the workpiece without stopping the work. When engraving complex patterns, you can choose different tools, which greatly speeds up work efficiency and improves product quality. Automatic tool-changing engraving machines are also the ultimate trend in the development of CNC engraving machine equipment.
But ordinary spindles only can be manual tool changed.
2. Motor and driver:
ATC CNC Router usually use servo motor and drivers power from 750w to 1300w , there have many brand like Japan Yaskawa servo, Taiwan Delta etc .
Common cnc router usually use stepper motor and drivers it is more cheap and low accurate.
About servo motor
Advantages: It has all the advantages of stepper motors and makes up for the shortcomings of stepper motors. It does not lose steps when the load large, provides timely feedback and reports, has high precision and fast progress.
Disadvantages: Only supporting drivers can be used, no mixing and matching
About stepper motors
Advantages: No steps are lost during work, acceleration ratio reaches 30%, good cooling effect, smooth operation and relatively small vibration, saving power
Disadvantages: low-frequency and low-speed vibration, small torque, no overload capability, loss of steps or stalling during operation with excessive load, low control accuracy, and correspondingly slow progress.
3. Control system:
ATC CNC Router system usually is Syctec 6MA/6MB/20MA/200MA (mostly use 60MA/60MB)
Common cnc router system have many types like Ncstudio /MACH3/DSP A11
Ncstudio have NK260 NK280 NK300
DSP have A11E/A18 etc
Mach3 usually used in America and Asia area
Working performance difference:
1. Increased productivity: Rhino ATC CNC router allows for automatic tool changes, which means that the machine can change tools without needing manual intervention. This helps to reduce downtime and increase productivity.
2. Improved accuracy: With our ATC CNC router, you can achieve greater accuracy and precision in your cuts. This is because the machine can change tools quickly and easily, allowing for more complex cuts and shapes.
3. Reduced setup time:the ATC CNC router can reduce setup time, as it can automatically change tools and adjust settings. This means that you can start working on your project more quickly and efficiently.
4. Versatility: With an ATC CNC router, you can use a variety of tools and cutters, which increases the versatility of the machine. This means that you can work on a wider range of projects using a single machine.
5. Cost-effective: While Rhino ATC CNC router may be more expensive than a common CNC router, it can be more cost-effective in the long run. This is because it can increase productivity, reduce setup time, and improve accuracy, which can help you save time and money over time.
Recommend ATC Wood CNC Router :
4 Axis 2040 ATC CNC Router with Rotary & Linear Tool Changer
| Number |
Description |
Parameter |
| 1 |
X,Y,Z Working Area |
2000mmx4000mmx200mm |
| 2 |
Table Size |
2130mm×4140mm |
| 3 |
X,Y,Z Traveling Positioning Accuracy |
±0.03/300 |
| 4 |
X,Y,Z Repositioning Accuracy |
±0.03mm |
| 5 |
Table Surface |
Vacuum and T-slot Combined (Option: T-slot table) |
| 6 |
Frame |
Welded structure |
| 7 |
X, Y Structure |
Rack and Pinion Drive, Hiwin Rail Linear Bearings |
| 8 |
Z Structure |
Hiwin Rail Linear Bearings and Ball Screw |
| 9 |
Automatic tool changer |
Linear type（disc type for option) |
| 10 |
Pieces of tool changer |
12 pieces |
| 11 |
Max. Working Speed |
40000mm/min |
| 12 |
Spindle Power |
ATC 9.0 kw |
| 13 |
Spindle Speed |
0-24000RPM |
| 14 |
Drive Motors |
Delta servo motor drivers 850W |
| 15 |
Working Voltage |
AC 380V/50/60Hz,3PH |
| 16 |
Command Language |
G Code |
| 17 |
Operating System |
Syntec Control System 60WE |
| 18 |
Computer Interface |
Ethernet, CF Card |
| 19 |
Flash Memory |
512M(U Disk) |
| 20 |
Collet |
ER32 |
| 21 |
X,Y Resolution |
<0.03mm |
| 22 |
Software Compatibility |
Type3/UcancameV9 software |
| 23 |
Running Environment Temperature |
0 - 45 Centigrade |
| 24 |
Relative Humidity |
30% - 75% |
| 25 |
Packing Size |
3500X2250X2200mm |
| 26 |
N.W. |
1800KG |
| 27 |
G.W. |
2000KG |
| 28 |
Delivery time |
14-20 working days |
Optimizing Your Production with 5-Axis CNC Machining
The Art of Precision: 5-Axis CNC Routers in Detail-VIDEO
