Are you looking for ways to boost the efficiency and productivity of your manufacturing process? Look no further. In today's rapidly evolving industrial landscape, staying ahead of the competition means utilizing cutting-edge technology to optimize produc
12mm steel can by cut by machine perfectly?
Before it is not a easy work and cutting edge not smooth, but now as fiber laser cutting machine technology development in market,12mm steel cutting become a easy thing.
In the video it is our Rhino fiber laser cutting machine with 2000w source for 12mm carbon steel cutting with fast speed and high precision.
If you want to know the cutting process ,welcome to read below:
Cutting speed: 1: If the cutting speed is too fast, it may cause the following consequences: it may not be able to cut through, sparks spray randomly, some areas can be cut through, but some areas cannot cut through the entire section. The rough cutting section will have a diagonal pattern, and the lower half will be stained.
Like 12mm carbon steel cutting, usually we set 1000mm/min and cutting perfectly.
2. The speed is too slow: it will cause over-melting, the cut surface will be rough and the slit will become wider, and the sharp corners will melt completely, affecting the cutting efficiency.
Rhino fiber laser cutting machine offer detail cutting speed list for different thickness and material.
Effect about gas on cutting quality: (The gas helps dissipate heat and support combustion, blows away dissolved stains, and improves the quality of the cutting surface)
When the gas pressure is insufficient, it will affect the cutting surface and produce melt stains. The cutting speed cannot be increased, affecting the efficiency; when the gas pressure is too high, it will affect the cutting quality; when the air flow is too large, the cutting surface will be thicker and the seam will be wider; When the air flow is too large, it will cause the cut part to melt (corner burning), and good cutting quality will not be achieved.
Effect about gas on drilling function:
When the gas pressure is too low, it will have an impact on the cutting quality; when the gas pressure is too low, it will be difficult to penetrate and the time will increase; when the gas pressure is too high, it will have an impact on the cutting quality; when the gas pressure is too high, the penetration point will melt and form Large melting point. Therefore, the pressure for perforation of thin plates is higher and that of thick plates is lower.
Effect about Fiber power on cutting quality:
(Laser power has a decisive influence on the cutting process and quality)
Like Rhino fiber laser cutting machine in the video it is 2000w raycus fiber source for 12mm steel cutting that can get very good effect quality. If power too low to cut
If the power is too high, the entire cutting surface will melt.
Insufficient power, resulting in melt stains after cutting If the plates you are cutting are mostly under 10mm, you can consider a 2000-watt fiber laser cutting machine.
Equipment with this wattage can guarantee high cutting speed, and can easily cut objects that require precision.
If you are cutting large quantities of metal sheets of about 10mm±2mm, then you should consider a higher one, such as a 3000-watt machine.
Optimizing Your Production with 5-Axis CNC Machining
The Art of Precision: 5-Axis CNC Routers in Detail-VIDEO
