New Technology of Rhino 5 Axis CNC Router , 4 Axis CNC Router , 3 Axis CNC Router
Rhino group offer high quality 5 axis cnc router, 4 axis cnc router, 3 axis cnc router, fiber laser cutting machine, fiber laser marking machine, laser welding machine etc with high quality and good price.
By Serena zhang | 11 May 2023 | 0 Comments

How to Install the Fiber Laser Cleaning Machine 1500W RFC-1500

How to Install the Fiber Cleaning Machine 1500W RFC-1500: New Users Must Read

Firstly we introduce the fiber laser cleaning machine: (what is fiber laser cleaning machine)
A new and efficient environmentally friendly cleaning technology that based on the interaction effect between laser and matter. It have 1000w and 1500w power for your opton.
Compare with traditional mechanical cleaning, chemical cleaning, and ultrasonic cleaning (wet cleaning process), Our fiber laser cleaning machine does not need any CFC type organic solvents that damage the ozone layer. So the fiber laser cleaning machine is pollution-free, noise free, and harmless to human health and the environment. It is a "green" cleaning technology. 

For new users how to install and operate this machine when open box ,kindly review below:


This is a completely ready fiber laser cleaning machine when you receive and you only need to do 3 steps mainly:
1. Connection air pump with machine
2. Put enough pure water into water chiller
3. Connect machine main power cable with your local power (If the plug not proper please use converter)

 
 
1) . Connection air pump with fiber laser cleaning machine 

We offer 1.5kw big power air pump that can suppor the fiber source working perfectly. Beside of machine there have holes to connect air pump easily.


2).Put enough pure water into water chiller 

We use high quality water chiller that will give good water cooling for this fiber laser cleaning machine. You need input pure water into it and make sure water is more enought (the water level should under of the yellow remark)

3).Connect fiber cleaning machine main power cable with your local power (If the plug not proper please use converter)Machine voltage is 220v single phase and you should connect with main power properly then OK

By this way, the machine has been installed preliminarily. If you want to learn how to use it , please reivew below:


Fiber laser cleaning machine Control screen explanation :(Scanning parameters: used to set the related parameters during galvanometer scanning)

1. No.: different parameter numbers can be used to set many sets of various cleaning
parameters.
2.Scanning speed: used to set the scanning speed of galvanometer
Usually set 20000mm/s
3.Laser power: used to set the percentage of laser peak power.
Usually set 1500 (if the laser source is 1500w)
4.Laser frequency: used to set the PWM frequency of laser
Usually set 5000HZ
5.Duty cycle: used to set PWM signal duty cycle of continuous laser.
Usually set 100
6.Scanning length: used to set the laser scanning length
Usually set 80-100


Other points before fiber laser cleaning machine installation:
This machine is deliveried by two ways, one is by sea another is by air.
If your machine is deliveried by sea you no need operate more.
1).If your machine is deliveried by air (or Express) there have some points please pay more attentions to:

This is the lithium battery and its right model inside of fiber laser source 1500w, when we package it will be take out because in air port custom they don't allow the battery come into plane.
When machine arrival your factory please prepare one at your local and install it.
2). Below is 
the Freon inside of water chiller will be moved,model is R32 that is not allowed delivery into air plane. When machine arrival your factory also please fill again at local.

Below is the steps how to fill R32 FREON into water chiller of fiber laser cleaning machine:


FAQ about the fiber laser cleaning machine RFC-1500:
Q1. What is usage of this fiber laser cleaning machine?
A:It can be applied to the cleaning of oil stains, oxidation layers, and rust layers on the surface of industrial equipment or processed parts, as well as the cleaning of rubber birthmarks on airport runways, and the cleaning of paint and welding marks on deck surfaces.
n addition, laser cleaning has gradually become the mainstream solution for cleaning cultural relics such as metal and porcelain in cultural protection work due to its minimal damage to the substrate of objects


Q2.What is materials can be worked by this fiber laser cleaning machine?
A: All kinds of metal like ss,carbon steel, aluminum ,brass,copper etc

Q3.What industry the fiber cleaning machine used in?
Aerospace, mold industry, automotive industry, food industry, sewage treatment, tire hub, petroleum, pharmaceutical industry, chemical industry, etc

Q4.Is it the movable type cleaning machine ?
A:Yes, it is hand-held fiber laser cleaning machine that is movable. You can bring it anywhere for rust clean easily.



Wecleom to contact us for more information about this fiber laser cleaning machine !
 

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code